FAQ: rec.crafts.glass
The following is an as-is compilation of Frequently Asked Questions, and their associated answers, compiled by subscribers to the USENET newsgroup "rec.crafts.glass". This list is made available to the public by permission of the FAQ article authors (as listed below).
These FAQs have taken the form of several mini-articles dealing with each of the categories listed below. The author of each will be more than happy to answer any questions which he or she may have managed to miss in their article. To make it really convenient to do that, you'll see an e-mail link as the by-line, and often another at the end of the article.
Plain-text versions of any of these articles may be obtained by sending an e-mail request to Steve Ackman. He's also the guy to contact if you'd like to contribute an article.
Please visit this newsgroup to learn and contribute to the wonderful world of glass. (Last updated: Monday July 03, 2006.)
# |
Title |
Original |
Contributing |
Last |
| Safety | Paul Wilson | Steve Ackman, John Riordan | 08/24/99 | |
1 |
Introduction, and Rules of the Newsgroup | Paul Wilson | Steve Ackman | 12/31/00 |
2 |
Glass Cutting | Steve Ackman | 08/23/00 | |
3 |
Copper-Foil Technique and Soldering | Paul Wilson | 08/24/99 | |
4 |
Lead Came | Paul Wilson | 08/24/99 | |
5 |
Kiln Forming, or Warm Glass | Steve Ackman | 12/06/98 | |
5a |
Spectrum Firing Guide | Spectrum Glass | Steve Ackman | 08/25/99 |
6 |
Sandblasting, etching, carving. | Roger Smith | Steve Ackman | 04/03/97 |
7 |
Beadmaking | Steve Ackman | 08/23/99 | |
8 |
Selecting Glass | Paul Wilson | 08/23/99 | |
9 |
Hot Glass - glass blowing and other work over 2000 degrees |
Mike Firth | 05/30/00 | |
10 |
WWW Sites | John Riordan | 07/03/06 | |
11 |
Tools | Paul Wilson | Steve Ackman | 08/23/99 |
12 |
Glossary | Paul Wilson | Steve Ackman | 08/23/99 |
13 |
Drilling Holes In Glass & Cutting Bottles | Paul Wilson & Steve Ackman |
Steve Ackman | 05/08/00 |
These FAQ pages are also available at: